16
EN
Problem
Possible cause
Solution
The plate (8)
remains cold or
does not heat up.
There is no power supply.
Verify whether the plug (11) is
inserted correctly or try inserting it in
another socket.
Ensure the O/I switch (10) is in
position "I".
The plate
temperature LED
(1) goes on and
off.
Normal procedure.
The switching on and off of the LED
indicates the heating stage of the iron.
Only a little steam
or none at all is
dispensed.
The steam selector (4) is
set to 0.
Set the steam selector (4) to the
desired field (Fig. B).
There is not enough water
in the reservoir (11).
Fill the reservoir (11).
The impurities that
come out from the
steam holes stain
the garments.
Chemical additives,
scented liquids or
descaling agents are
being used
These substances damage the
product: do not add additives to the
water in the reservoir.
Starch is being used.
Always spray the starch on the
reverse side of the fabric.
Water leaks from
the plate (8).
The plate temperature is
too low due to the super-
steam button (3) being
pressed too often .
Allow slightly longer intervals between
the jets of steam.
