Imetec GK608, Руководство по эксплуатации

Страница: 28 / 170

25
EN
hair.
• To further adjust the cutting length use the micro-adjustment button
(4).
TIPS
• Start with the adjustable comb set to the longest cutting length and
reduce the cutting length in gradual steps.
• For the best results, use the appliance against the direction of hair
growth.
• As not all hair grows in the same direction, use the appliance
upwards, downwards or sideways as needed.
• If hair accumulates in the adjustable comb (8 or 9), clean it by
blowing on it or shaking it to remove the accumulated hair.
• Take note of the settings of the cutting length used as a reminder
for future use.
Using the vertical nose and ear trimmer (6)
After applying it on the product, carefully trim any extra nose and ear
hair.
Using the body shaver head (7)
This head was designed to remove hair in all areas of your body. After
applying it on the product, trim the hair in the concerned areas.
Touching up
With the minimum cutting height and with the U-blade (5), touch up
your sideburns, moustache and edges as you like.
MAINTENANCE AND STORAGE
WARNING! Always disconnect the
appliance from the socket before
cleaning or performing maintenance.
Switch the appliance off and clean immediately after each use or if the
cutting head is excessively fouled with hair or dirt.
• Do not use powdered products, abrasive liquid products or
solvents such as alcohol or petroleum-based products to clean the