TECHNICAL MANUAL
Page n°19 of 25
RF TRANSCEIVER MODULE 2.4GHz
B034
Doc. Revision°:0
Date: 11/01/2021
Technical Manual file.dot
revisione n° 0
data: 24/02/2020
IMET s.r.l.
Via Ronche, 93 33077 Sacile (PN)
–
ITALY
–
Tel. (+39) 04347878
–
Fax (+39) 0434 737848 P.IVA C.F. e Reg. Impr. PN:01106390931 R.E.A.
43483 CCIAA PN http//www.imet.eu e-mail:
ANNEX A - Regulatory Approval
This section outlines the regulatory information for the B034 module for the following countries:
•
United State;
•
Canada;
•
Europe;
A.1 United State
The B034 module is received Federal Communications Commission (FCC) CFR47
Telecommunications, Part 15 Subpart C “Intentional Radiators” modular approval in accordance
with Part 15.212 Modular Transmitter approval. Modular approval allows the end user to integrate
the B034 module into a finished product without obtaining subsequent and separate FCC approvals
for intentional radiation, provided no changes or modifications are made to the module circuitry.
Changes or modifications could void the user's authority to operate the equipment. The end user
must comply with all of the instructions provided by the Grantee, which indicate installation and/or
operating conditions necessary for compliance.
The finished product is required to comply with all applicable FCC equipment authorizations
regulations, requirements and equipment functions not associated with the transmitter module
portion. For example, compliance must be demonstrated to regulations for other transmitter
components within the host product; to requirements for unintentional radiators (Part 15 Subpart B
“Unintentional Radiators”), such as digital devices, computer peripherals, radio receivers, etc.; and
to additional authorization requirements for the non-transmitter functions on the transmitter
module (i.e., Verification, or Declaration of Conformity) (e.g., transmitter modules may also contain
digital logic functions) as appropriate.