Imesa ES80PEHP, Руководство по эксплуатации, Страница: 9 / 24

9
TUMBLE DRYING
Below are step-by-step instructions to help you achieve
the best possible tumble-drying results.
SORT YOUR FABRICS
You will achieve the most uniform drying results if the
items are made of the same type of material. Do up zips
and buttons, fasten belts, sort the items and adjust the
load and temperature.
NOTE!
Do not overload the drum!
Overloading the dryer will result in poor drying results
and wrinkling.
Press the main power switch until the display lights. Open
the door, load the items and then close the door.
NOTE!
Make sure that objects e.g. detergent dispensing balls,
have been removed from the laundry. They could melt
and cause damage to the dryer or the laundry.
NOTE!
To save energy, always observe the maximum load for
each programme (see Program chart).
Guidelines as to what specific programmes can be used
for:
The Auto extra dry, Auto dry and Auto normal dry
programmes have two temperature settings.
Normal temperature but also low temperature for more
delicate items.
Auto extra dry
Temperature normal. This programme is for items that are
particularly difficult to dry, such as jeans with very thick
seams.
Auto dry
Temperature normal. These programmes shut off the heat
once the load is dry but before it is bone dry. The Auto
dry programme shuts off the heat slightly later than Auto
normal dry. Use trial and error to find out what works best.
Auto normal dry
Temperature normal. These programmes shut off the heat
once the load is dry but before it is bone dry. The Auto
dry programme shuts off the heat slightly later than Auto
normal dry. Use trial and error to find out what works best.
Auto extra dry
Energy Save. This programme is for items that are
particularly difficult to dry, such as jeans with very thick
seams.
Auto dry
Energy Save. These programmes shut off the heat once
the load is dry but before it is bone dry. The Auto dry
programme shuts off the heat slightly later than Auto
normal dry. Use trial and error to find out what works best.
Auto normal dry
Energy Save. These programmes shut off the heat once
the load is dry but before it is bone dry. The Auto dry
programme shuts off the heat slightly later than Auto
normal dry. Use trial and error to find out what works best.
Auto Iron dry
This programme shuts off the heat once the load is just
damp enough for ironing or pressing.
Select a programme by turning the programme selector. The selected programme is shown in the display window.
Programme selector Display window
Main power switch Start Stop
SELECT THE PROGRAMME