2022/06/24 09:08
5/21
manual_mcf-lw13io
e n g i n k o . s u p p o r t . c e n t e r - https://www.enginko.com/support/
Move the NFC antenna of the mobile (the exact position varies depending on the model of the
smartphone) to the sensor antenna, in the area shown in the figure:
To use the NFC interface, the device must be powered through terminals L LINE and N LINE. The
power status is visible on the red/green led.
Always validate your settings by reading the NFC data after the sensor has restarted.
Configuration can be done only via NFC. No USB port available.
2.5 System leds
LoRaWAN® not configured
Slow flashing
Joining
Quick flashing
Sending
Quick flashing
Receiving
Quick flashing
Steady state
Fixed
Data error
Flashing 2 seconds
Connection error
Flashing 1 second
www.ime.de
