Why is there no notification after enabling it?
Android users: Make sure tracker is connected to your phone.
Once done, open privileges and allow the device to access
Incoming Calls, Messages and Contacts in Settings.
If there is a security APP installed on your phone,
add this APP to trusted APP list.
iOS users: If no notification is coming through, reboot the phone and
Connect once again.
After, click Pair after the Bluetooth Pairing Request.
Sleeping Mode
While you sleep, the tracker will automatically monitor how long and
how well you sleep, data can be checked on the APP.
Note: The band must be worn while sleeping in order to do so.
①
Click the function key to change the display page to Heart Rate,
the tracker will automatically test your heart rate. Default is shown
as “-0 -”before results. “- 0-”or last test results will be shown when
Heart Rate unused.
②
You can also connect the phone APP to test heart rate, by clicking
on the "start" button.
Tip: Sensor must be close to the skin while measuring the heart rate.
Heart rate test area must be kept clean. Sweat or stains will affect the
test results.
Instruction Videos
Please visit iMCO website and watch videos for how to turn on/off
the band, install app, connect band and phone, as well as demo
videos of settings and features.
www.imcotechnology.com/coband-support/
FAQ
Why does the heart rate measurement take 8 seconds?
Why must the band be on tight during the heart rate measurement test?
This is for more accurate results.
According to Light Reflection Theory, light will reflect to the sensor if there
is space between the band and your skin, which can affect accuracy.
