IMC pc2 series 4, Руководство по установке, эксплуатации и техническому обслуживанию

Страница: 9 / 13

6 CHIPPER
CHANGING KNIFE BLADES
The knife blades are supplied as a pack and individual blades cannot be
changed. Change the knife blade pack as soon as it is damaged or blunt. To
change the knife blade pack remove the knife block and undo the two screws
securing the knife blade pack. Dispose of the old blades carefully and screw
the new knife blade pack in place. See diagram below.
For optimum performance IMC recommend changing the blade pack every 6
months, or sooner depending on usage.
NOTE: Take care when handling the knife block. The blades are sharp.
MAINTENANCE
Details of IMC Service Contracts are available on application.
ORDERING SPARE PARTS
In the event that spare parts or accessories need to be ordered, please always
quote the SERIES AND SERIAL NUMBER of the machine. This is to be found
on the rating plate located near the supply cable.
For installations outside the UK please contact your supplier.
For information on IMC spares and service support (if applicable), please call
IMC on +44 (0)1978 661155. Alternatively, contact us via email or fax:
IMC Service Desk Fax: +44 (0)1978 667766
E-mail: service@imco.co.uk
IMC Spares Desk
Fax: +44 (0)1978 667759
E-mail: spares@imco.co.uk