IMC Networks MediaConverter 1 Скачать руководство пользователя страница 5

1

 

About the Modular Media Converters 

The Modular Media Converter Series includes modules that convert copper to single-
mode or multi-mode fiber at Ethernet, Fast Ethernet and Gigabit speeds.   

Modular Media Converter series chassis provide power to media converter modules, 
and are available with one, four, eight or twelve slots for installing any combination of 
McPIMs (10Mbps Ethernet), McLIMs (100 Mbps Fast Ethernet), McLIM TP-TX/FX 
(Switching 10/100 Mbps) and McGigabit modules (1.25 Gbps Ethernet). 

Media 

Converter 

Description 

 

Is a standalone chassis which includes one media conversion module 
slot, and a fixed, internal 115/230 VAC power supply. 

Is a standalone chassis which includes four media conversion module 
slots, and a fixed, internal 120/240 VAC power supply. 

Is a 1U high, Rackmountable chassis that includes eight media module 
slots and a fixed 120/240 VAC power supply. 

12 

Is a Rackmountable chassis and includes twelve media conversion 
module slots and a 115/230 VAC power supply.  MediaConverter/12 is 
1U high and has the power on the rear of the chassis with media 
conversion module slots on the front. For redundancy a second power 
supply maybe installed. 

About McPIMs 

McPIMs (Media Converter Port Interface Modules) are 10 Mbps Ethernet modules 
which provide a single-conversion between 10Base-T twisted pair and 10Base-FL 
single-mode or multi-mode fiber.  McPIMs include one RJ-45 connector and one pair 
of ST or SC fiber optic connectors.  Each McPIM requires one slot in a media 
converter chassis. 

Содержание MediaConverter 1

























Отзывы: