16
Menu Options
1
= Refer to the
Unit Configuration Screen
2
= Refer to the
Port Alarm Status
screen
3
= Refer to the
SFP
Line Status
screen;
SFP
DDMI
alarms are also displayed
4
= Refer to the
Ethernet Port Configuration
screen
5
= Refer to the
Ethernet Port Status
screen
6
= Refer to the
E1 Port Configuration
screen
7
= Refer to the
E1 Port Status
screen
NOTE
On all configuration screens, the title is the same as the "option" selected from the
previous screen.
Unit Configuration Screen
The unit configuration screen displays the names of the Host and Remote units as
well as the service state, whether fiber protection is enabled and the SFP
BER
alarm
level. In addition, the unit time can be set from this screen and the username and
password can be set/reset.
The screen displays the current status for items 1 through 8. For security reasons, the
current username and password are not displayed.
For items 1 through 8, enter the number of the menu item to be changed, and then
enter the new value when prompted. The unit and port names can be assigned by
the end-user and are used in
SNMP
associated TRAP alarm messages.
