30
The Configuration/Remote Screen
Depending on whether the IE-MiniFiberLinX-II is being set up as a standalone or in a
Host/Remote connection, the Configuration or Remote buttons will show a screen for
configuring the IE-MiniFiberLinX-II settings.
In addition to allowing setting changes on the IE-MiniFiberLinX-II, settings on the
ports can also be changed from the Configuration/Remote screen.
For information or instructions on the use of UMA (Unified Management Agent), refer
to the SNMP Management module manual.
Configuration File Save/Restore Function
Requirements
The Configuration File Save/Restore Function allows a user the ability to backup all
the configuration settings of a unit. With this backup, a user can restore settings to a
unit if necessary or use this backup to apply the same settings to a different unit.
All configurable managed objects are saved in a configuration file that is stored in the
unit’s Large File Area. This includes all configurable settings such as VLAN
configurations, IP Address configuration and SNMP agent settings. The configuration
file can be transferred from the unit to a PC and saved to disk through the iConfig
protocol. The configuration file can be transferred from a PC to a unit of the same
