IMB MB2002B-BS-FT7010, Инструкция по эксплуатации

Страница: 10 / 16

6
5、Debugging method
5.1.Suction & trimming
（1）Suction: after starting the machine, step forward on 4.1 - (2) foot pedal to start
suction. When the cloth covers the reflective tape, the suction stops after a short delay.
When the reflective tape is exposed to the suction, the foot pedal releases to stop suction.
（2）Trimming：The machine head starts to sew and the scissors start to cut the thread.
The machine head stops the scissors and they run synchronously. It should be noted that
after sewing, the fabric should be pushed forward for a certain distance, and the thread
should be tied to the air inlet
5.2 Turnover plate
（1）Turnover conditions: the cloth leaves the reflective paper, step on the foot pedal
to release the turnover.
（2）Flap swing speed adjustment：The flap is directly driven by the air cylinder. The speed
of flap swing can be adjusted by adjusting the speed regulating joint of the air cylinder.
The speed should be moderate. Too fast will cause the cloth to fly out or make abnormal
noise.
a. Speed up joint: control the feeding speed of turning plate, speed up the left-hand speed
regulating valve and slow down the right-hand speed regulating valve.
Suction
port
Reflective
tape