12
ENGLISH
4.
Connect the necessary cables to your DVD Writer.
Figure: Connecting Cables
(A)
IDE Cable: Plug one connector of the IDE cable into the IDE connector on the rear panel
of the drive before you insert the drive into your computer. Then thread the cable
through the front of the open bay and back toward the motherboard.
(B)
Power Cable: Connect a power cable from the computer to the POWER connector of the
drive. In most computers, you will find free power connectors that are ready for you to
use.
(C)
Audio Cables (Optional)
You may connect the analog audio cable if you want to use a sound board in your system.
This cable runs from the four-pin analog audio output connector on the rear panel of
your drive to your sound board. Or you may connect a digital audio cable if your sound
board is equipped with the Sony/Philips digital interface (SPDIF) or Digital-In, and you
wish to use the digital audio output from your drive.
