imagistics DL460 Скачать руководство пользователя страница 208

Страница: 208 / 227

6-48

a Mes

sage

App

ear

Chapter 6

9. The Machine is not Functioning as Designed

The machine is not functioning as designed

* If these procedures do not correct the problem, turn OFF the Power Switch, unplug the power cord from

the power outlet, and contact your Technical Representative.

Symptom

Check for

Action

The Touch Panel shows nothing.

Is only the Start key lit up green? The machine is in the Energy

Saver mode. Press any key on
the control panel to cancel
Energy Saver mode.

Auto Shut Off is activated.

Turn the Power Switch ON.

The Display Contrast Knob is
turned to the excessively light or
dark position.

Viewing the Touch Panel, adjust
the Display Contrast Knob as
necessary.

The Start key does not light up
green.

Is your Access Number or
Account Number entered?

Enter your Access Number or
Account Number by following
the procedure given in “Entering
the Access Number.”

☞

p. 2-20

No copies are fed out when the
Start key is pressed.

The machine has developed a
malfunction.

Check the Touch Panel and take
action according to the message
on the panel.

The machine was just turned ON
and is warming up.

It takes the machine about 4 min.
to be ready for making copies
after it has been turned ON.
Please wait.

Control panel keys do not
respond.

The Interrupt key LED is lit up.

The machine is in the interrupt
mode. Press the Interrupt key to
cancel the interrupt mode.

The machine is not activated
when the Power Switch is turned
ON.

The power cord is left unplugged
from the power outlet.

Plug the power cord into the
power outlet.

The room circuit breaker is
open.

Close the room circuit breaker.

4003P141CA

1166O260AA

Содержание DL460




































































































































































































































Результаты поиска

Содержание DL460

Отзывы:

imagistics DL460, Руководство по эксплуатации, Страница: 208 / 227

Результаты поиска

Содержание DL460

Отзывы: