imagistics DL170, Руководство по эксплуатации

Страница: 96 / 157

Advanced features
Note: If changing a previously stored command, skip to step 7.
5
Press until “Communication” appears.
6
Press
ENTER
. The
LCD
now shows either:
or
7
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number
can be up to 40 characters in length:
Your display can show only 20 characters at a time. To view characters beyond
those 20, press
to scroll to the left or to scroll to the right.
Important: Do not press
ENTER
.
8
Now, while you still can see the fax number on the
LCD
, press
ADVANCED
FUNCTIONS
three times and then press
ENTER
. The
LCD
shows:
9
Use the numeric keypad to enter the
ITU
-
T
sub-address for the box to which
you want to send the document. Here, we’ve entered 123456:
10
Press
ENTER
. The
LCD
shows:
Note: If there isn’t a password for this box, press
ENTER
, then skip to step 13.
11
Use the numeric keypad to enter the appropriate
ITU
-
T
password for the box.
Here, we’ve entered 654321:
When finished, press
ENTER
.
12
If you want the transmission to begin immediately every time you press the
key, press
ENTER
and skip to step 15.
If you want to delay the transmission, press
ADVANCED FUNCTIONS
,
ENTER
.
13
Next, tell your fax to carry out this delayed command one of these ways:
Option 1 Monthly: Perform the command once at a certain time on a cer-
tain day of the month. (For example, “Do this on the 30th at
5:05
PM
.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2 Daily: Perform the command at a certain time each day you
press the key. (For example, “Do this at 5:05
PM
today.”)
To select this option, use the numeric keypad to enter 0, 0 and
then the time when the fax should perform the command:
14
Press
ENTER
,
ENTER
.
15
The
LCD
asks if you want to make additional settings for this programmable
one-touch number.
If you do not want to make additional settings, press
ENTER
. Skip to step 29.
If you do want to make additional settings, press and
ENTER
.
16
The
LCD
asks which resolution you want to use for this programmable one-
touch number.
17
Press until the mode you want appears.
Note: For any of the following settings, choose “-----” if you want to use the
default setting for this programmable one-touch key.
Resolution :------
/ /Enter
Option :Off
/ /Enter
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
Enter Password
654321_
Enter Password
_
Enter Sub-Address
123456_
Enter Sub-Address
_
P2:Fax#/Advan.Func.
9-5550629_
P2:Fax#/Advan.Func.
9-5558743_ P2:Fax#/Advan.Func.
_
Type :Communication
¬ / ® /Enter
3.42