NSM-8×1AES/NSM-7×2AES Installation and Operation Manual
67
Appendix B: Resource Module X-Y Network Communication
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Command
Command syntax is as follows:
@ X:<Lvls>/<Dest>,<Src>[/<Dest>,<Src>...][:I<ID>
Note
The terminal may see the
prompt “
>
” character before or
during the time when status
messages are being received.
Table B-4. Crosspoint Take
Command Syntax
Command Syntax
Element
Syntax Format Description
Header
@
@ followed by a space ( ) indicates
pass-through commands
Command
X:
Crosspoint Take
command
Parameters
<Lvls>/
A list of one or more single digit
level numbers (in hex; valid level
numbers= 0–9, A–F). Multiple levels
can be specified by concatenating
multiple level numbers before
ending the list of levels with the “/”
character (e.g., 0124
/
specifies levels
0, 1, 2, and 4)
<Dest>,
Hexadecimal number representing
the destination number to be preset
(valid destination numbers = 0 –
FFF0) (The last 15 source and
destination numbers are reserved.)
<Src>
Hexadecimal number specifying the
source to be preset. (Valid source
numbers = 0 – FFF0, and the letter
X; “X” is used when the specified
destination on the requested level(s)
is to be disconnected).
