Imagine communications Selenio 6800+, Инструкция по установке и эксплуатации

Страница: 41 / 54

Installation and Operation Manual
27
Copyright © 2011, Harris Corporation
Status Parameters
Configuration > Control
Password Specifies the password protecting the module's
control interfaces. 31-char
admin
Telnet Enables/disables the module's Telnet interface. Enable, Disable
Enable
Clear Status Clears and resets all status parameters.
„
Enable - This value is a momentary state.
The module accepts this value, clears all
status values, and returns this parameter to
the ‘disable’ state.
„
Disable - This value is the typical state for
this parameter.
Enable, Disable
Disable
Load Defaults Loads factory default settings and resets module. Yes, No
No
Reset Resets the module. Yes, No
No
Table 5-2 Status Parameters
Command Path Description Options Default
Status > Dmx
Transport Stream Present Indicates whether a transport stream is present. Present
Not Present
N/A
—
Transport Stream Rate (Mbps) Indicates the transport stream rate. 0.000 to 300.000
Mbps
—
Program Pres Indicates whether the selected program is
present in the transport stream. Present
Not Present
N/A
—
CC Errors Provides a count of continuity count errors. Counter —
Program Number Indicates the number of the program being
de-multiplexed. Text String
—
Program Name Indicates the program name. Text String —
Overflow Error Count Provides a count of overflow errors. Counter
CAM card status Indicates the state of the Conditional Access
sub-system. Empty
Present
Recognized
Active
Error
—
CAM card name (Available in a future release)
Indicates the Conditional Access System ID. Text String
—
Status > RF [1–4]
Table 5-1 Configuration Parameters
Command Path Description Options Default