Imagine communications Selenio 6800 SFS6803+OP+SFS+, Инструкция по установке и эксплуатации

Страница: 89 / 118

SFS6803
+
and OP
+
SFS
+
Installation and Operation Manual
75
Module
Status LEDs
SFS6803
+
and OP
+
SFS
+
modules do not have any card-edge alarms. Instead, a module
status LED on the corner of the module lights up if an error is detected. See Figure 3-10 on
page 74 for the location of these LEDs, and Table 3-14 for a definition of the LED colors.
Note: If the LED is flashing red, please contact your Customer Service representative.
Alarms If a major or minor alarm is triggered within your SFS6803
+
or OP
+
SFS
+
module, the Status
LED lights red.
Alarms are usually logged and monitored within available software control applications (for
example, CCS Navigator). You can only differentiate between major and minor alarms
within a software control application. See the appropriate software control user manual or
online help for more information.
AUDIO 3 Green Indicates presence of AES audio on AES input 3
AUDIO 4 Green Indicates presence of AES audio on AES input 4
AUDIO 5 Green Indicates presence of AES audio on AES input 5
AUDIO 6 Green Indicates presence of AES audio on AES input 6
AUDIO 7 Green Indicates presence of AES audio on AES input 7
AUDIO 8 Green Indicates presence of AES audio on AES input 8
Table 3-13 Monitoring LEDs (Continued)
LED Color Indicators Meaning
Table 3-14 Module Status LED Descriptions
LED Color Sequence Meaning
Off There is no power to the module; the
module is not operational.
Green There is power to the module; the module
is operating properly.
Red There is an alarm condition.
Flashing red The module has detected a
hardware/firmware fault.
Amber The module is undergoing configuration.