Imagine communications Selenio 6800 SFS6803+OP+SFS+, Инструкция по установке и эксплуатации

Страница: 42 / 118

Chapter 3
Operation
28
Activating SFS6803
+
and OP
+
SFS
+
Functions
The following sections provide information about the SFS6803
+
and OP
+
SFS
+
special
functions:

Adding a License Key on page 28

Fast Video Switch on page 28

Audio Test Tones on page 29

Group (1-4) Deembedding Control on page 29

Audio Embedding Errors on page 33

Input Audio Rate (With the AES Option Only) on page 35

Video Frame Synchronization on page 35

Audio Synchronization on page 37

Audio Path on page 37

Seamless Sound Function on page 38

Test Pattern Generator on page 40

Dolby-E Automatic Header Alignment on page 40

Passing Dolby-E Audio on page 40

Audio Delay Ranges on page 41

External Audio Processing Delay on page 41

Maintaining Audio/Video Alignment on page 41

AFD/WSS/VI Detection and Insertion on page 41
Adding a License Key
Note: For assistance with a license key, or to purchase a license key, please contact your
Sales representative.
To enter a license key to activate AES audio (4 or 8 inputs and outputs), 1.5G HD video, and/
or 3G HD video, your CCS software must be in Control mode.
1 Select the SFS6803
+
module in the Navigation pane, right click, and then select Control
to open the module’s Control window.
2 Select the Parameters tab.
3 Select General in the tree view, and then type your license key in the License Key field.
Note: SFS6803
+
and OP
+
SFS
+
modules appear as SFS6803
+
modules in Navigator.
4 (AES4 and AES8 options only): After entering the license key, wait 30 seconds for the
module to save the settings, then remove and reinsert the module.
This allows additional alarms to become visible.
If your license key is valid, the Installed Options field displays the features that are
activated on the module, which in this case is HD , 3G , AES4 , or AES8 .
Fast Video
Switch
When input video is switched between two sources while both sources are within vertical
blanking, use the
Fast Switch parameter to enable fast video switching between the
sources. In this mode, output video is not frozen when both sources are within the vertical
blanking area when the switch takes place.