ImageTech printWiFi, Руководство пользователя

Страница: 32 / 44

32
printWiFi Power Switch:
The printWiFi power switch can be pressed for 1 second to turn the
printWiFi on or off anytime except during the startup process. After
pressing the Power Switch to turn on the printWiFi, it should be allowed
to finish the 35 second startup process before attempting to press
the power switch again. Interrupting the boot process can cause an
abnormal state and should be avoided.
Reset the printWiFi by pressing the Power Switch for 10 seconds. A
reset is not required during normal product operation. However, a Reset
can be performed after a firmware upgrade or in the rare case of an
abnormal state.
printWiFi Charging:
Connect the printWiFi Micro USB Cable to an USB AC Adapter. The
printWiFi battery requires a minimum of 4 hours to charge with nothing
else connected to it. A fully charged battery will provide approx. 1 hour
of printing and retain the charge for up to 3 weeks in Power OFF mode.
Power save feature turns the unit off after 10 minutes of inactivity when
running on battery.
Note: A mobile device may be charged when the printWiFi is charging
by connecting the mobile device (phone or tablet) to the printWiFi
Mobile Device USB connector. When a mobile device is being charged
through the printWiFi, a full charge time for both devices may require 12
hours or longer. Note: Tablet screens should be off to facilitate a faster
charge.