Mode selection: USB Mode
You can connect to a PC or notebook through Micro-USB to make
iMage A2 Bluetooth Conference Speakerphone your expansion
speakerphone set.
Connection method:
1. First connect the USB cable to the Micro-USB jack of iMage A2
Bluetooth Conference Speakerphone.
2. Wait for the computer to automatically install the drivers (please
first confirm that your computer is connected to the internet).
3. Set the “Playback device” and “Reception device” of the computer
as iMage A2.
* To use iMage A2 Bluetooth Conference Speakerphone with specific
application programs, you must first go to the program’s settings to
select the
“Playback device” and “Reception device”
.
FAQ
I he
ar continuous burst noises
* Bluetooth is a wireless technology and is very sensitive to the
objects between the connected devices.If there are no large objects
(such as walls etc.) blocking between iMage A2 Bluetooth
Conference Speakerphone and the connected device, the maximum
allowed distance between the two can reach up to 10 meters.
I cannot receive calls using iMage A2 Bluetooth Conference
Speakerphone
* Please confirm that the mode selected is “Bluetooth Mode”.
* Please confirm that iMage A2 Bluetooth Conference Speakerphone
has successfully paired with your device.
* Please increase the volume of iMage A2 Bluetooth Conference
Speakerphone.
I had problems during pairing
* You may have accidently deleted the pairing data during operation.
- Please refer to the pairing instructions in the “Bluetooth Mode”
chapter.Problems faced when playing music from music devices
(mobile phones, PC, MP3 players etc.)
* Please confirm that other devices support Bluetooth 3.0
(downwards compatible) and A2DP, or else it will not be able to
operate.Please refer to the user manual of the device used, and find
out how to pair it with the Bluetooth playback device.
C
ontact Us!
1. Website Introduction: http://www.iMagetech.com.tw (provides
the newest support information and online user manual)
2. E-mail address: http://www.iMagetech.com.tw/contact.php
3. Please call: 886-2-27967041
4. Address: 5F., No.16, Aly. 15, Sec. 6, Minquan E. Rd., Neihu Dist.,
Taipei City 114
Mode selection: Adapter Mode (optional purchase)
You can purchase the
iMageTech MCU4 Speakerphone System
or
iMage A1 Bluetooth Adapter Tx/Rx additionally to connect the audio
input and output of the video device, making iMage A2 Bluetooth
Conference Speakerphone your external auxiliary speakerphone for
your video set.
Connection method:
1. Connect the
iMageTech MCU4 Speakerphone System
or iMage A1
Bluetooth Adapter Tx/Rx output/input to the audio input/output of
the video device.
2. Connect the
iMageTech MCU4 Speakerphone System
or iMage A1
Bluetooth Adapter Tx/Rx power and press the connect (Bluetooth
connection) button.
3. iMage A2 Bluetooth Conference Speakerphone will automatically
connect with the adapter.
* Please refer to the user manual of
iMageTech MCU4 Speakerphone
System
or iMage A1 Bluetooth Adapter Tx/Rx for detail setting
process.
Statement
Th
is product complies with the provisions of the low-power radio
wave radiation Administrative Regulations Article XII-XIV etc.
* Without permission granted by the DGT, any company, enterprise,
or user is not allowed to change frequency, enhance transmitting
power or alter original characteristic as well as performance to an
approved low power radio-frequency devices.
* The low power radio-frequency devices shall not influence aircraft
security and interfere legal communications; If found, the user shall
cease operating immediately until no interference is achieved.
* The said legal communications means radio communications is
operated in compliance with the Telecommunications Act.
* The low power radio-frequency devices must be susceptible with
the interference from legal communications or ISM radio wave
radiated devices.
Notice: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
