background image

4

Weight

Storage

Tube

Seat

Upright

Weight Guide

Weight Glider

Barbell

Safety Spotter

Right Side

Left Side

Note: The terms Òright sideÓ and Òleft sideÓ
are determined relative to a person sitting
on the bench. They do not refer to right
and left on the drawings in this manual.

Adjustment

Bracket

Backrest

Thank you for selecting the versatile IMAGE

¨

3.8

weight bench. The IMAGE

¨

3.8 is designed to help you

develop every major muscle group of the body.
Whether your goal is a shapely figure, dramatic mus-
cle size and strength, or a healthier cardiovascular
system, the IMAGE

¨

3.8 will help you achieve the spe-

cific results you want.    

For your benefit, read this manual carefully before
using the IMAGE

¨

3.8 weight bench. 

If you have

additional questions, please call our Customer Service

Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
note the product model number and serial number
before calling. The model number is IMBE41990. The
serial number can be found on a decal attached to the
IMAGE

¨

3.8 (see the front cover of this manual).

Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.

Before You Begin

Содержание 831.159701



















Отзывы: