Image Engineering
Seite
11
von
12
3.3 Using iQ-Near Focus with other IE measurement devices
3.3.1 LED-Panel (timing measurement)
Figure 1 Connection scheme iQ-Near Focus and LED-Panel
Place iQ-Near Focus in front of the device under test and connect the TRS connector (6.3
5 mm “jack
plug”) to the corresponding port labeled “Defocus” on the LED-Panel.
Please refer to the LED-Panel manual for details on measuring different timing parameters (shutter
lag, autofocus time, etc.) and how to interpret the captured images.
3.4 Care instructions
•
Always store the iQ-Near Focus in a safe and stable position
•
Avoid contact with water
•
Do not use any chemical cleaning agents
•
Use compressed air or a dust blower to remove dust
