Image Engineering
iQ-Align XL
Seite
4
von
5
2 GETTING STARTED
2.1 Scope of delivery
iQ-Align XL, attachment parts (for CAL3-XL and LE7),
¼” screw, user manual
2.2 Commissioning
2.2.1 Setup instructions for CAL3-XL / LE7
The iQ-Align XL has two adjustable locking rings on the wider end of its frame that fit around the
front feet of the CAL3-XL / LE7. Please make sure that the distance of the locking rings to one
another matches up with the distance of the CAL3-XL / LE7 feet. To adjust the distance, loosen
the M8 screw of the locking ring and move it along the frame. When the locking ring is
positioned correctly, tighten the screw again. Please ensure the locking rings are positioned
symmetrically around the center axis of the iQ-Align XL.
To attach the iQ-Align XL to the CAL3-XL / LE7 you now only need to slightly lift the front feet
up, slide the locking rings of the iQ-Align XL under them and carefully lower the feet into them.
Adjusting the position
Connecting the iQ-Align XL to your CAL3-XL / LE7
