9.3.1.1 Unit
Picture 32: Unit of measurement list
Select the unit of measurement in which the value shall be displayed.
The maximum value of the selected unit of measurement are displayed in the fields
“Maximum”.
To define the size and the position of the scanned area, enter a value in the fields
—
Bottom Border
—
Height
—
Zero Offset
—
Width
This applies to the input of values:
Maximum = Bottom Height
(vertical)
Maximum (+/–) = Zero Width
(horizontal)
If one of the allowed maximum values is exceeded, the entered values will be ignored and
the last valid value will be displayed.
Please note that for all changes the following is valid:
Click the button “Apply” to transfer and save the changes.
Click the button “Reset” to return to the former displayed value.
Operation Manual
Page 43
Содержание Bookeye Color
Страница 1: ...Color Operation Manual...
Страница 2: ...For your notes File IAC_BE2 SCL R2_eng doc...