ILVE KHVI75TC, Инструкция по установке и эксплуатации

Страница: 13 / 16

13
G G G B B GB B
Respect for the environment
Packaging material is ecological and can be recycled.
The appliance contains noble metals. Current regulations apply to recycling.
When the time comes to scrap your appliance, you should utilize the various options for disposal provided by
your dealer and/or by your local authorities; remember that prior to scrapping the appliance you should make
sure that it is not useable.
Instructions for installation
Installation should be performed only by qualifi ed personnel. The technician should be aware of current regu-
lations.
The gasket provided with the hob will prevent liquids from leaking between the hob and the cabinet. Carefully
apply the gasket 2 mm from the edge of the glass.
The dimensions of the inset area are 730 x 490 mm
The gasket provided with the hob is suffi cient to cover the perimeter of the inset area. Its glue resists to a tem-
perature of 100 °C. The hob is in class “Y”. It is advisable to leave the adjacent walls free when installing the
hob. Nonetheless, placing a single side wall and a back wall is allowed. The walls should be kept at a minimum
distance of 50 mm. The inset surface, if subject to any water leaks, should be protected primarily along the
border of the inset perimeter with paint. Do not install the hob above a static oven or above a dishwasher. Make
sure that the there is at least 20 mm space underneath the hob to facilitate proper ventilation. Make sure that
there is at least 5 mm between the working zone and the upper border of any drawers or ovens to guarantee
that air is not trapped within. Do not place any infl ammable objects inside the draw located under the hob. The
distance between the hob and the cooker hood must comply with the indications provided by the maker of the
cooker hood. Should indications not be provided, comply with the minimum distance of 760 mm. Once installed,
the connecting cable should not be subject to stress or tension. Installation of the hob in mobile environments
(such as boats) should only be performed by specialized personnel.
Built-in scheme
MIN. 50 mm
MI
N.
2
0
m
m
MI
N.
5
m
m
MIN. 50 mm
MI
N.
2
0
m
m
MI
N.
5
m
m
Installation