12
Turn the knob (A) clockwise. Between the off position (0) and the power position (1) the-
re is the position (u) which identifies the function for heating food at 42°. The maximum
time of use for both functions is limited to 120 minutes. Both functions are prioritized
over the ‘HEAT-UP’ mode.
A display is associated with each cooking area.
- Set power level: (1-9)
- Food heating 42° (U)
- Booster: (P)
- Heat-up: (A)
- Residual heat: (H)
- Pan absent or not suitable: (U)
- External error: (E)
- Knob permanent rotation: ( | )
A maximum time of continuous operation is associated with each cooking area. This
depends on the selected power level. If the limit of the duration of operation is rea-
ched, the respective area is switched off.
Power level Approximate limit of the
duration of operation (hours)
(5 min. [P], later 85 min. [9])
The power management, in case the booster function is being used, is performed in
the following way: the level set cooking more recent priority over other areas. The acti-
vation of a cooking zone is not shown on the display when prompted for a power too
high. In this case only after having decreased the power level by turning the knob of
the cooking zone counterclockwise the regular operation starts with the relative power
display in use on the display.
During operation, if a cooking zone overheats too much, the power is reduced
automatically and the display shows the new level just edited. At this point it is only pos-
sible to decrease the power level. As soon as the temperature of the cooking zone falls
below the critical value it will possible to restart the cooking normally.
Heating function 42°
Display
Limit of the duration of
operation
Power management
Overheating of cooking
zone
INSTRUCTIONS FOR USE
Use of the induction hob
U
1
2
3
4
5
6
7
8
9
P
2
6
6
5
5
4
1,5
1,5
1,5
1,5
