ILVE CH900X, Инструкция по эксплуатации

Страница: 6 / 12

33
then released purified in the environment. The charcoal
filters must not be washed, but replaced 2 or 3 times a
year, depending on how much the hood is used. New
filters are to be requested directly to the manufacturer.
To replace the charcoal filters, just remove the motor
protection panel, centrally positioned between the metal
filters: locking is performed with magnetic closures;
simply exert a modest manual force, without the use of
tools. At this point you can remove the active charcoal
filter through rotation of about 90 ° with respect to their
position to unhook from the locking lugs, accompanying
then the filter downward, without the aid of tools. Fig.
18-19-20-21.
To reinstall the new activated carbon filters, reverse
operations.
In order to remove the remaining glue or any impurity,
the cooker hood must be cleaned immediately after
installation and after having removed the protective film.
The cooker hood must be cleaned frequently both
internally and externally (at least once a month).
Do not let dirt gather on the inner and outer surfaces of
the hood.
To clean the exterior of the hood do not use either acid
or basic products, or abrasive sponges.
Clean the hood with a sponge dampen in warm water
and a little quantity of neutral detergent (for example
dishwasher detergent), in order to remove possible
particles of grease.
Rinse with a damp cloth, removing all the detergent
carefully, following the satin finish direction on the steel
surface.
Drying is very important, especially in areas where water
is particularly hard and leaves limestone.
The hood features a LED light that, in addition to
offering a good lighting and a significant energy savings,
are guaranteed to last on average 10 times more than
traditional lights.
All the ordinary and extraordinary maintenance can be
performed without having to remove the hood.