GB
7
Connection to the electrical power mains
WARNING
This apparatus must be earthed.
The oven is only for domestic use.
The feed voltage and the absorbed power are as indicated on the data plate attached to
the left-hand side upright, which can be seen when the oven door is open.
Connecting must be carried out by qualified personnel and in accordance with the
regulations currently in force.
The manufacturer can not be held responsible for any damages to persons or objects
caused by failure to observe these instructions.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
The oven must be connected to the mains through a multipole circuit breaker with a contact-
to-contact gap of at least 3 mm, making sure that the earth wire is not disconnected. For
connecting use a flexible cable remembering to make it long enough to allow the oven to
be removed from its housing unit when maintenance work is required.
The terminal box is located at the rear of the appliance. If a new cable is fitted, route it
through the clamp and make the connections as shown in the diagram. The earth wire
must be cut longer than the other wires so that it will be the last to break off in the event
of the cable being tugged.
Having made the connection, tighten the cable clamp and close the cover of the box.
230-240 V~
L
N
R
1
2
3
4
5
PE
T
1
2
3
4
5
R
PE
L1
L2
L3
S
N
T
1
2
3
4
5
R
PE
L1
L2
S
1
2
3
4
S
5
R
PE
L1
L2
L3
T
N
230-240 V~ 3
400-415 V~ 2N
400-415 V~ 3N
220 V~
L
N
R
1
2
3
4
5
PE
T
1
2
3
4
5
R
PE
L1
L2
L3
S
N
T
1
2
3
4
5
R
PE
L1
L2
S
1
2
3
4
S
5
R
PE
L1
L2
L3
T
N
220 V~ 3
380 V~ 2N
380 V~ 3N
3 x 2,5 mm
2
4 x 2,5 mm
2
4 x 1,5 mm
2
5 x 1,5 mm
2
H05RR-F
H05VV-F
H05RN-F
H05V2V2-F
CONNECTION DIAGRAM
CABLE TYPES AND SECTIONS
