iLuv
TM
Stereo Audio System for Your iPod
V11M10_IM_EN_11012006
www.i-Luv.com
- 18 -
MAINTENANCE & TROUBLESHOOTING GUIDE
Symptom
Possible Problem
Solution
There is no sound on the external
speakers when connected by the
audio patch cable.
Speakers lack the power source.
The signal from LINE IN/OUT jacks needs to be amplified.
Use the active speakers or another amplified audio device.
There is radio, but the AM band is
not functioning.
The AM loop antenna is not connected securely to
the unit.
Insert the AM loop antenna connector to the jack on the
back of the unit.
AM band radio is very noisy.
The AM loop antenna is not connected securely to
the unit
Rotate the AM loop antenna and keep away from the main
unit for the best reception.
Volume level on the device or the i277 is set too
high.
Decrease the volume.
Sound is distorted.
Sound source is distorted.
If the iPod original sound source (MP3) is of poor quality,
distortion and noise are easily noticed with high-power
speakers. Try a different audio source such as a music CD
to test.
Batteries are weak and outdated.
Change current battery with new battery.
Remote Control does not operate.
Remote control aimed away from the i277.
Move within 10 feet of the unit and then point the remote
control toward i277.
