HD Radio Receiver with iPod Dock and Dual Alarm Clock
V10M10_IM_EN_03032008
www.i-Luv.com
- 13 -
OPERATIONAL INSTRUCTIONS
General Radio Operation
The following procedures can be accomplished by using the controls of the main unit.
1.
Press
the
POWER
button to turn on the unit.
2.
Press
the
FUNCTION
button to operate the unit in radio mode.
3.
Press
the
BAND
button repeatedly to switch the band (AM / FM).
4.
Press and hold the
TUNING
T
/
S
button for one (1) second to automatically scan radio stations.
5.
Press
the
TUNING
T
/
S
button again to stop automatic station scanning.
6.
Press
the
TUNING
T
/
S
button repeatedly to manually tune the stations.
7.
Press the VOLUME
T
/
S
button to control the volume.
Listening to the Radio
1. When listening to an FM station, fully extend the antenna to insure maximum tuner sensitivity.
2. Automatic tuning depends on the signal strength of the broadcasting station, so weak stations are sometimes skipped. Tune manually to find the
weak stations. With stronger stations, the tuner may stop before it reaches optimum setting for that station. Adjust manually for the best reception if
needed.
3. For FM reception, the unit provides FM STEREO/MONO selection. In stereo mode, the unit will automatically switch to stereo when a strong FM
stereo broadcast is received and will indicate “ST” in the LCD.
4. To receive a weaker (noisy) FM station, press the
SET / FM MODE
button to switch to MONO mode. The reception may improve, but the sound
heard is MONO.
