Portable DVD Player i1155_V11M11_IM_EN_10052007
www.i-Luv.com
- 27 -
TROUBLESHOOTING GUIDE
No Power
•
Insert the AC power plug securely into the wall power outlet
iPod videos not displayed on the 8.4” LCD screen.
•
Check the TV settings of your iPod. The
TV OUT
option of your iPod must be set to
ON
.
Refer to the section
Watching Your iPod Videos on the 8.4” LCD Screen
in this manual
for related instructions.
•
Your iPod is not in the play mode. Play the video on your iPod.
iPod isn’t recharged.
•
Check whether the AC adapter is connected. In order to charge your iPod, the AC adapter
must be connected to the DVD player.
•
Check whether your iPod is properly installed in the dock.
Play does not begin even after the PLAY (
X
) button is pressed or it starts to play and
stops immediately
•
Condensation may have formed. Allow 1 to 2 hours for the player to dry out.
•
The disc may be incompatible with this unit. This player can only play DVD, VCD and CD
formats.
•
The disc may be dirty and require cleaning.
•
The disc may be improperly loaded. Be certain it has been loaded with the label side up.
No picture on the LCD screen
•
Ensure that the disc or iPod mode is properly set.
•
Ensure that the iPod is properly connected.
No sound or distorted sound
•
Ensure that the disc or iPod mode is properly set.
•
Ensure that the iPod is properly connected.
•
Ensure that the input settings for the iPod are properly set.
Picture is distorted during the rapid advance or rapid reverse
•
The picture will be somewhat distorted at times. This is normal.
No rapid advance (or rapid reverse) playback
•
Some discs may have sections which prohibit the rapid advance (or rapid reverse).
Remote Control Does Not Work
•
Ensure that the batteries are installed with the correct polarities (+ and –).
•
The batteries may be exhausted. Replace them with new ones.
•
Point the remote control unit at the remote control sensor and attempt operation.
•
Operate the remote control at a distance of less than 6m from the remote control sensor.
•
Remove the obstacles between the remote control unit and remote control sensor.
