Page 8 of 16
Ilumipod LL User Manual Rev. 1
Operation
4. Operation
RDM2go Control
The Ilumipod LL requires an external controller, such as the RDM2go (from Chauvet Professional), to
change its configuration.
Menu Map
Refer to the Ilumipod LL product page on
for the latest menu map.
The Ilumicode section of the RDM2go (from Chauvet Professional) is required to access the full menu of
options. For more information, download the RDM2go User Manual from
.
Main Level
Programming Levels
Description
STATIC
RED
000–255
Configures the static color and effect
GREEN
BLUE
COOL
SOLID
STROBE
DIMMER
OFF
Dimmer works in linear mode
DIM1–4
Dimmer works in non-linear mode, from fastest (DIM1) to
slowest (DIM4)
CALIB
WHITE
(1–11)
RED
000–255
Determines the white balance for the color macros
GREEN
RGBTOW
BLUE
Determines the white balance when RGBTOW is active
COOL
PERSON
ARC1
3-channel: RGB control
ARC1+D
4-channel: dimmer, RGB control
ARC2
4-channel: RGBL control
ARC2+D
5-channel: dimmer, RGBL control
ARC FULL
8-channel: dimmer, RGB control, preset colors, color
temperature, strobe, dimmer speed
SOLID
1-channel: LED control
SPECIAL 1
11-channel: dimmer, strobe, dimmer speed, RGBL1, RGBL2
SPECIAL2
9-channel: dimmer, RGBL control, preset colors, color
temperature, strobe, dimmer speed
DMX 001–512
Selects DMX address
(highest channel restricted to personality chosen)
UC-CALIB
RED
000–255
Universal color calibration
GREEN
BLUE
SETTINGS
COLOR
OFF
Maximum output, unbalanced white
RGBTOW
White output is determined by the
CALIB
>
RGBTOW
settings
UC
Output matches that of product’s previous versions
RESET
NO
Resets unit to factory default settings
YES