Iluminarc Ilumipod 18g2 IP Optic RGB, Руководство пользователя

Страница: 10 / 23

Installation
6 Ilumipod 18g2 IP Optic WW User Manual Rev. 4
3. Installation
Make sure to mount
this product away
from any flammable
material as indicated in the
Safety Notes
.
Mounting
Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes .
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Installation
The Ilumipod 18g2 IP Optic WW comes with two adjustable brackets with 3-mm slot openings to
mount the product on any firm, non-flammable surface. The angle of the product can also be
adjusted and locked into place after the fixture has been mounted. ILUMINARC® recommends
following the general guidelines below when mounting the Ilumipod 18g2 IP Optic WW.
•
When selecting an installation location, consider ease of access to the product for
operation, programming adjustments, and routine maintenance.
•
Make sure the product’s mounting location can support its weight. See the Technical
Specifications for the weight requirement(s) of this product.
Procedure
The Ilumipod 18g2 IP Optic WW comes with a mounting base which connects to the arm of the
product. The mounting plate has four 6.1-mm holes on the corners to mount the product in any
orientation to almost any firm, non-flammable surface capable of supporting its weight. You will
have to use 4 mounting points per product.