4
HARDWARE AND ACCESSORIES
The iLi3 can be hung from
steel cables or can be
mounted to a rack.
Before you begin installation,
check that you have all the
necessary parts to begin.
1 iLi3 Fixture
1 Power Cable
4 Steel Hanging Cables with attached
cylindrical locks for hanging
IN THE BOX
1-877-540-5588
iluminarlighting.com
5
Lay the central mast on a flat table top or surface with the attachment
brackets facing UP. Attach each LED Bar by aligning the plastic clips
and carefully sliding them into place until you hear a soft click.
CONNECTION INSTRUCTIONS
Once the plastic clips are all snapped in place, attach the A/C cables
coming from the mast to each LED bar by aligning the connector pins and
pressing the ends together. Lock by twisting in opposite directions.
Once all the LED bars are fastened into place and A/C cables are attached
to the mast, turn the fixture over (this may require more than one person).
Ensure the flat surface is clear of anything that could damage the delicate
diodes.
SLIDE
2
1
3
!
CAUTION
when handling your ILUMINAR iL Fixture.
The LED array should NOT come in contact with sharp
objects. DO NOT touch diodes or apply direct force to the
diodes as this can/will cause permanent damage.
© Copyright 2020, ILUMINAR Lighting
Subject to change without notice.
