ILUMINAGE PRECISE TOUCH, Руководство пользователя

Страница: 17 / 23

26
EN
27
EN
No indicator lights are on. • Ensure the DC plug of the power supply is securely
plugged into the device and the other end is connected
to an AC outlet.
• If the power supply has been properly connected, press
the power button located on control panel of the device.
• Power supply is not properly connected to the
device or to an electrical source.
• Device wasn’t turned on.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
No energy light flashes from
treatment window. • Device wasn't turned on.
• Energy level was not selected by pressing the elōs
button.
• RF skin contact bars not in contact with the skin in
treatment area.
• Device was left idle for more than 3 minutes and
turned off.
• In order for the
PRECISE TOUCH
to emit flashes, make
sure all 3 conditions (device on, energy level selected,
RF skin contact bars in contact with skin) are met. If the
device was idle, press the power button to reactivate the
device for treatment again.
If you still have questions about your
PRECISE TOUCH
system, contact Customer Care at www.iluminagebeauty.com
All 3 energy indicator lights
are steady blue (not blinking).
• Device flashes consumed or a technical issue.
• Cooling vents covered.
• Room temperature too high. • Turn off and disconnect the device from the power supply and
contact our Customer Care Specialists for assistance.
• Let device cool. Turn the device back on to re-attempt your
treatment.
• Plug the cord back into the device.
• Move to a cooler room
3 energy indicators are
blinking in a continuous cycle. • When the device was set to HIGH energy level the
elōs button was pressed to lower the energy level
to LOW.
• Wait for the indicator lights to stop cycling and the LOW
energy level indicator is a steady blue. Then treat the
desired area.
All 3 energy indicator lights
are blinking blue. • An energy level was not selected after turning on
the device.
• Press the elōs button once to select the LOW energy
level. To select MEDIUM or HIGH energy levels, use the
elōs button until the indicator light displays the energy
level you desire.