Ilumen
5
Installation Manual Ilumen PIDbox Light v1.2
2.2
Q
UALIFICATIONS OF SKILLED PERSONS
The work described in this document must be performed by skilled personnel only. Skilled
personnel must have the following qualifications:
✓
Knowledge of how an inverter works and how it is operated
✓
Training in how to deal with the dangers and risks involved in installing and operating
electrical devices and plants
✓
Training in the installation and commissioning of electrical devices and plants
✓
Knowledge of all applicable standards and directives
✓
Knowledge and observance of this document and all safety precautions
2.3
S
AFETY PRECAUTIONS
2.3.1
E
LECTRIC SHOCK
When the Ilumen PIDbox Light is in operation, voltage will be present. Prior to
maintenance work on the PV plant, switch off the Ilumen PIDbox Light.
When you want to change the arrangement of the Ilumen PIDbox Light you must switch
off the Ilumen PIDbox Light 20 minutes prior to making any changes.
2.3.2
E
LECTROSTATIC DISCHARGE
Never operate the Ilumen PIDbox Light when not properly installed or when the
components are not closed properly. Always make sure the grounding of the Ilumen
PIDbox Light is done correctly.
3
S
COPE OF DELIVERY
1.
1
x
Ilumen PIDbox Light
2.
1
x
DC power supply
3.
1
x
Power cord (AC plug)
4.
4
x
Rubber feet
5.
2
x
Mounting bracket
6.
1
x
Installation manual
4
P
RODUCT DESCRIPTION
The Ilumen PIDbox Light is placed in parallel over the solar array strings. The power of the
strings
doesn’t
go through the PIDbox. You can use one Ilumen PIDbox Light per 2 MPP trackers.
From each tracker, 2 wires will need to be connected to the PIDbox Light. In section 6 of this
manual a detailed description will be given to properly connect the PIDbox Light.
