Change of Blade Channel (Cleaver)
Swift F1
Quick Reference Guide
1.
Detach the automatic cleaver (Swift CI-03) from the F1
body using a hexagon wrench as shown the picture 1.
2.
Open the cover and push the slider forward.
When the slider is fixed, loosen the set screw a little
bi (
2
) i h h
h
1. Detaching
2. Loosing the set screw
•
Turn OFF the F1 before doing process.
•
Be careful handing the Blade.
bit (approx. 2 turns) with a hexagon wrench.
3.
Turn the marking on the blade counter-clockwise one
by one with a cotton swab.
Assemble the automatic cleaver in the reverse manner of
detaching.
3. Changing Channel
Blade Replacement & Adjustment of Blade Height (Cleaver)
Blade Replacement
•
Turn OFF the F1 before doing process.
•
Be careful handling the Blade.
•
Thoroughly & Accurately set the height using a gauge
because the height directly effect SPLICE LOSS.
1.
2.
3.
Adjustment of Blade Height
2.
1.
1. Loosen the set screw at the side of the cleaver detached
from the F1 a little bit (approx. 2 turns) with a wrench.
2. Insert a wrench into the hole at the bottom of the cleaver
and loosen the set screw of the slider a little bit
(approx. 2 turns). Slider has to be moved backward.
3. Insert the wrench bolt into the cam pin and pull it with
tweezers and detach the slider.
4. Not to damage the blade. Assemble the part in the
1. Insert a wrench into the hole at the bottom of the cleaver
and loosen the set screw of the slider a little bit
(approx. 2 turns). The slider has to be moved backward.
2. Adjust the blade height by turning Cam Pin.
Clockwise turning: HEADING to UPWARD
Counter-Clockwise turning: HEADING to DOWNWARD
3. When the blade reaches required position, tighten the set
screw of the slider.
Contact :
Contact :
/ +82
/ +82--42
42--671
671--5609~11
5609~11
reverse manner.