SWP BEAUTY PLATE KIT
INSTALLATION INSTRUCTIONS
TOOLS REQUIRED:
Drill
Drill bit and Driver bit to fit mounting screws (supplied by others)
*note: an extended driver bit is recommended (at least
6” long)
ILP, LLC, 519 Codisco Way, Sanford, FL 32771 | Phone: (407) 478-3759, Fax: (407) 478-3760 | www.ilp-inc.com
Page 2 of 3
INSTALLATION INSTRUCTIONS:
• Mount the SWP fixture per its included instructions. Take care to properly apply the silicone
sealant all around the junction box.
• Align one Beauty Plate Half (Item 1) around the fixture as shown below.
• Drill a pilot hole through one of the Beauty plate holes. Install a screw in the hole to hold the
Beauty plate in place.
CAUTION:
BE SURE TO READ COMPLETELY THROUGH THE INSTRUCTIONS SUPPLIED WITH THE
SWP FIXTURE AS WELL AS THIS DOCUMENT PRIOR TO INSTALLATION.