background image

When operating voltage is on or below DC3.7 ± 0.2, scan the opening card or enter a digital 

code  to  unlock,  indicator  light  blinks,  and  the  lock  emits  continuous  eight  beeps  alarm  to 

show low voltage, the batteries must be replaced with new ones. 

Emergency Unlocking

 

In case the batteries used up, use a 6V battery pack charger to insert into the power port on 

the  side  section  of  the  front  panel,  then  scan  the  opening  card  or  enter  a  digital  code  to 

unlock. 

Auto-unlock Function 

For example, the cabinets are used by shift work employees; the cabinets can be used 

within  the  set  time,  when  the  set  time  is  due,  the  cabinets  will  be  automatically 

unlocked for next shift work employees use, in this case, the cabinet lock must be set 

auto-unlock function. 

The default is in non auto-unlock mode 

a). 

Depress 

“*”

 button, and scan the master card near the inductive area, after three short 

“beeps” sound, it is 24-hour auto-unlock mode. 

b).

  Depress 

“*”

  button,  and  scan  the  master  card  near  the  inductive  area,  after  two  short 

“beeps” sound, it is 12-hour auto-unlock mode. 

(c). 

Depress 

“*”

  button,  and  scan  the  master  card  near  the  inductive  area,  after  one  short 

“beep” sound, it is not auto-unlock mode. ) 

Note: 

1. The user code (one-time code or permanent code) can be used only after the owner 

card and the master card(s) or master code must be programmed Uirst; 

2. Digital code is the general name, including master code, permanent code, and one-

time code; 

3. User code: permanent code or one-time code; 

4. Opening card: master card or user card; 

5. Digital code digit is from 1-digit to max 9-digit, any number combination from 0 to 9 

6. Light and sound prompt: 

  To lock: red light and 2 beeps sound;  

  To unlock: a green light and a beep sound; 

7. When scanning the card near the inductive area, you can scan near the front side or 

from the back side; the real side sensitivity is better due to the back side is entirely 

plastic material.

 

8. Owner card is essential and should keep it in safety! (If the user forgot about the 

password  and  could  not  open  the  cabinet,  and  the  master  card  was  lost  or  taken 

away by the employed manager, How to unlock the cabinet? Use the Owner card to 

delete the existing master card and program a new master card, use the new master 

card to open the cabinet!)

 

 

Ilockey Technology Co.,lTD 

                            

                              

Focused on smart lock  solution

 

Содержание IC 906








Отзывы: