3
5
of
INSTALLATION INSTRUCTIONS
STEP 2:
a. Connect the House Ground Wire to the Fixture Ground
Wire.
b. Connect the House White (or Ribbed) Wire to the
Fixture Supply Wire (White or Ribbed Side).
c. Connect the House Black (or Red) Wire to the Fixture
Supply Wire (Black or Smooth Side).
d. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
Outlet Box.
WHITE OR RIBBED
BLACK (OR RED) WIRE
GROUND WIRE
WHITE OR RIBBED
BLACK OR SMOOTH
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
FROM FIXTURE
FROM FIXTURE
FROM FIXTURE
Use Wire Connectors to connect the wires.
Mounting
Screw
Backplate
Outlet Box
Mounting Ball
Crossbar
STEP 4:
a. Install the correct bulb referring to fixture markings and/or labels for maximum wattage.
Outlet Box
Crossbar Assembly
Outlet Box Screw
Mounting Screw
Hex Nut
STEP 1:
a
. Remove the Crossbar Assembly from the Backplate on
the Fixture Body as shown in STEP 3.
b. Secure the Crossbar Assembly to the Outlet Box with
Outlet Box Screws.
c. Temporarily attach the backplate to the mounting
screws on the Crossbar, securing with the mounting
balls. If the backplate is not snug against the wall,
remove it from the crossbar and adjust the length of the
mounting screws by unscrewing the hex nuts. Turn the
screws in or out of the crossbar until the correct length
is achieved, then re-attach the backplate. Once the
backplate is secure, remove mounting balls and
backplate as shown in STEP 3.
STEP 3:
a. Carefully tuck all wires into the outlet box and position
the backplate of the Fixture Body over the outlet box.
Align the holes in the backplate of the Fixture Body with
the mounting screws attached to the crossbar. Pass the
fixture over the mounting screws and secure by
threading mounting balls onto end of mounting screws.
Tighten until snug.
