●
Make sure the fan is on a stable, flat surface when in operation.
●
Do not use the fan near windows. Rain and moisture may create
electrical hazard.
●
Close supervision is necessary when this unit is used when children
are around.
OPERATING INSTRUCTIONS:
1.
Set fan on a dry, stable and flat surface.
2.
Connect power plug to any standard 120-volt AC outlet.
Caution: Make sure the Speed Control is in the OFF position.
3.
Change the setting on the speed control to the desired
operating speed --- OFF"0", LOW"1", MEDIUM"2" or HIGH"3".
4.
To change the tilt -angle of the Fan Head, loosen the Tilt
Adjustment Knob on the side of the Grille, tilt the Fan Head to
the desired angle and tighten the knob. The knobs on both
sides are tools for tilt adjustment.
Note
: It is normal for the motor to feel warm to the touch during
operation. The motor is thermally protected and will
automatically shut off when it overheats for any reason. If this
happens, immediately disconnect the fan from the power outlet.
The motor bearings are permanently lubricated at the factory
and do not require any additional lubrication.
CLEANING
WARNING: Unplug from fan from the wall outlet before cleaning. After
cleaning, any safety device (including grills and blades) must be
reinstalled or remounted as previously installed.
Use soft damp cloth then wipe with dry cloth. Do not use harmful
cleaners. Do not bend the blades.
Wash guards and blades with water and a soft brush. Avoid harsh
