INTENDED USE
This product is intended only for indoor residential and office use, not for
industrial or other commercial use. Use your fan only with adequate
wiring that matches Code. If you have any questions about the adequacy
of your wiring, consult a qualified electrician. As with any electrical
appliance use only with a smoke detector that is in proper working order.
In using your fan, you should read and follow the IMPORTANT
INSTRUCTIONS below. The word WARNING in these instructions indicates
a hazard that, if not avoided, could result in injury or death.
IMPORTANT INSTRUCTIONS
When using or servicing electrical
appliances, basic safety precautions should always be followed to reduce
the risk of electric shock, and injury to persons, including the following:
Use this fan only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons. Do not place fan on an uneven or surface smaller than
fan which might allow fan to tip or fall causing damage to property or
injury to people. Do not use in a window. Extreme caution is necessary
when fan is used by or near children or people with physical challenges.
Do not use the fan with the fan guards removed. Do not sit or stand on fan.
Do not place objects on fan.
To reduce the risk of fire or electric shock, do not use this fan with any
solid state speed control device such as a dimmer switch. Do not insert or
allow foreign objects to enter any ventilation or exhaust opening as this
may cause electric shock, and/or a fire hazard. Do not use it in areas
where gasoline, paint, or flammable materials are used or stored. A fan
has sparking parts inside. Do not leave fan where drapes or curtains will
get pulled into the fan or against the fan guard.
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. DO NOT attempt
to defeat this safety feature. Do not operate any fan with a damaged cord
