Assembly
&
Operating
Instructions
CAUTION
:
Read and follow all instructions before operating fan. Do not use fan if any
part is damaged or missing.
WARNING
: To reduce the risk of electrical shock, do not use this fan with any solid state
speed control device.
This outdoor fan can be used alone or with misting systems by adding a Mist Ring.
This appliance has a 3-prong grounded plug and
must be inserted into a matching
grounded GFI outlet for safe operation and to reduce the risk of electrical shock.
Instructions
for
Safe
Operation
• Never insert fingers or any other objects through the grill guard when fan is in operation.
• Always mount fan with the supplied bracket.
• Unplug the fan when removing guards for cleaning.
• Do not use with an extension cord.
• Do not place fan or any parts near an open flame, stovetop, cooking or other
heat-generating appliances.
ASSEMBLY
INSTRUCTIONS
Wall
or
Ceiling
Mounting
-
Permanent
Mounting
Only
1) Locate solid wall stud or ceiling beam. Mark the center of the beam. If you do not have
a solid structural framing member at that location, you will need to find an adequate
alternative for mounting the fan.
2) Drill pilot hole for 3/8" lag bolt.
3) Secure with the hardware provided.
Fan can also be mounted to concrete with the appropriate fastener.
NOTE:
Plug
fan
into
a
GFI
outlet
to
ensure
safety
OPERATING
INSTRUCTIONS
To
adjust
airflow
upward
or
downward
: After installation, this fan can be tilted to adjust
for desired airflow. Tighten pivot knob(s) on side of fan to retain desired angle.
Speed
Control
: Use pull chain switch for low, medium, or high speed, and to turn fan off.
It is normal for the motor to feel warm to the touch after continuous operation. This fan
features thermal protection that will automatically shut the fan off should it overheat for
any reason. If this happens, immediately unplug the fan from the outlet.
CLEANING INSTRUCTIONS
Unplug the fan from the outlet before cleaning. After servicing, all parts (including grills
and blades) must be reinstalled or remounted as previously installed. Use soft damp cloth
then wipe with dry cloth. Do not use harmful cleaners. Do not bend the blades. The motor
bearings are permanently sealed and do not require additional lubrication.
