iLive IVCC900X, Общее руководство

Страница: 13 / 15

12
Emptying and cleaning the oil collector (For those models fitted with oil collector)
The fan is fitted with a oil collector that collects oil from the fan blades and fan housing.
1. Remove the grease filter and the charcoal filter (if fitted).
2. Remove the oil collector and clean it in warm water with washing up liquid. It can also be
cleaned in a dishwasher.
DO NOT let dirt build up on the hood
DO NOT use steel wool or steel br ushes to clean the hood
DO NOT leave salt solutions, disinfectants, bleaches or cleaning compounds on the hood for
any length of time as they may damage the stainless steel. Rinse after use with clean water
and wipe dry with a clean cloth.
Replacing the bulbs
Depending on your model of hood, there are two possible types of lighting, halogen and LED.
The illumination is designed for use during cooking and not for prolonged general
illumination of your kitchen. Prolonged use of the lights may reduce the life time of the bulbs.
WARNING: Do not touch or change light bulbs while the hood is operating. Wait
until the bulb has cooled before removing.
Use only the same bulbs as the original specification. Re-placement lights are available
through the dealers.
Halogen and LED Lights.
With the grease filter removed, from inside the hood press the light fixture out of its mounting
bracket. Unplug the light from the wiring harness. Avoid direct contact between the lenses and
your hands.
Replace the damaged lamp by reversing the steps. Snap in place.
Replace the bulbs as follows:
Halogen lights:
1. Lift up and remove the light fitting with a screwdriver or other suitable tool.
12