Features
• Bluetooth wireless:
range 60 ft.
• Shock proof
• Rubberized coating
• DC battery power -
built-in rechargeable
battery: approx. 8
hrs playtime at 50%
volume
Includes
• USB charging cable
• Carabiner
• User’s Guide
Waterproof Rating - IP66
• Complete protection from dust, oil, and other non-
corrosive material.
• Complete protection from contact with enclosed
equipment.
• Protection from water, even from powerful jets
of water.
• Equivalent to NEMA rated 4 and 4X enclosures.
Overview
Power Status
Indicator Light
Low Battery
Flashing red light
Charging
Solid Red light
Finished Charging
No light
Charging the Battery
Initial charge time is approximately 2 hours. Charge
fully before use.
1. Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor (not included)
to charge the unit.
Pairing a Bluetooth Device
1. Press and hold the Play/Pause/Speakerphone/
Pair button until the indicator light begins
flashing blue.
When pairing, remain within 3 feet
of the unit.
2. Using the controls on your Bluetooth device,
select ISBW157 in your Bluetooth settings to pair.
If your device requests a password, enter the default
password
0 0 0 0
. Refer to the user’s manual for
your specific device for detailed instructions on
pairing to Bluetooth devices.
3. When successfully paired, an audible chime will
sound and the LED indicator will change to solid
blue. Audio from the connected Bluetooth device
should now be heard through the speaker, see
next section for playing music wirelessly.
After initial pairing, the unit will stay paired unless
unpaired manually by the user or erased due to a reset
of the device. Repeat these steps if your device should
become unpaired or will not connect normally.
Warning: Do not, under any circumstances, charge the speaker
while it is in or near water. Allow ample time to dry before
charging after use in water.
Power
Press and hold to power ON/OFF.
Micro-USB Charging Port
& Waterproof Flap (rear)
LED Indicator Light
Microphone
Pair / Play / Pause /Speakerphone
Press and hold to begin pairing.
Press to play/pause audio or answer/end a phone call.
Volume/Skip
Press to adjust volume.
Press and hold to skip audio forward or back.
IMPORTANT: To ensure your speaker is prepared for use in a wet
environment, disconnect and remove any power cables, and
tightly close the charging port water cap. If the water cap is not
properly closed, water resistance will be compromised and could
result in damage to the speaker or personal injury.
