Microphone
Requires a microphone with
a 1/4˝ audio cable or 1/4˝
adapter (not included).
1. Connect a microphone
to the Microphone
Input on the unit.
The speaker will
play audio from the
microphone as long as
it is connected.
2. Use the Volume Dial
to adjust the overall
volume of the speaker
and microphone. Press
and hold the
buttons to adjust the echo effect of the microphone.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: [email protected] | Email Parts: [email protected]
Copyright © 2018 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
Customer Support
Protect for Today
Sustain for Tomorrow
Made
Green
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm
audio cable to the Aux
In on the unit and the
audio output/
headphone jack on
an audio device.
2. Press Source to switch
to Aux Mode.
3. Use the controls on the
connected device to
select and play audio.
Be sure the volume on
your connected device
is audible when you
begin playing.
USB
MIC
USB
MIC
Bluetooth Wireless
Pairing & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by the user
or erased due to a reset of the device. If your device should become unpaired or
you find it is unable to connect, repeat the steps listed here.
1. Press the
button to select Bluetooth Mode, indicated by the voice
prompt “Bluetooth”.
2. Press and hold the
button to enter pairing mode, indicated by the voice
prompt “Bluetooth is connecting.” The speaker will now be discoverable by
your Bluetooth device.
3. On your Bluetooth device, scan for and select ISB309 in your Bluetooth
settings to pair.
If your device requests a password, enter the default password
0 0 0 0 . Refer to the user’s manual for your specific device for instructions on
pairing and connecting Bluetooth devices.
4. When successfully paired, the voice prompt will say “Bluetooth connected.”
Use the controls on your connected device to select and begin playing
audio. Use the controls on the speaker or the connected device to play,
pause, and adjust volume.
USB
1. Load a USB drive
into the USB Media
port. The speaker will
automatically switch to
USB Mode, indicated by
a voice prompt. You can
also press the Source
button to switch to USB
Mode manually.
2. Use the controls on the
speaker to select and
play audio from the
connected drive.
FM Radio
Radio Reception
An FM receiver is built into the speaker. Adjust the position of the speaker to
improve FM radio reception.
Radio Tuning and Saving Station Presets
1. Press the
button to select FM Radio Mode, this will be indicated by a
voice prompt.
2. Press and hold the
button to scan and save radio stations automatically.
3. Press the
buttons to cycle through saved radio stations. Press
and hold to manually search through FM radio frequencies.
USB
MIC
Charging the Battery
To power the unit or charge the internal battery, plug the USB charging cable
into the DC Power Input on the speaker and a powered on computer or USB power
adapter (not included) and standard power outlet. Battery life is approximately
3 hours.
USB
MIC