9
Playing a CD+G Disc
Programming a CD or CD+G Disc
Step 1:
Press the
Power Button
to turn the unit on.
Step 2:
load the CD+G disc into the unit’s CD drive.
Step 3:
adjust the
Source Dial
to
CDG
.
Step 4:
Press the
Play/Pause Button
to play the loaded disc.
Step 5:
Plug in the included microphone to the
Mic 1
Connection
. adjust the
on/off Switch on the microphone to the on position.
• If feedback noise is present, move the microphone away from the unit
and/or reduce the microphone’s volume.
Step 6:
adjust the
Volume Dial
to adjust the volume of audio output from the
speakers. adjust the
Microphone Volume
Dial
to set the volume of a
connected microphone.
Step 7:
Turn the
AVC Select Dial
to
Vocal
.
Step 8:
Use the
AVC Dial
to adjust the balance between the music and vocals.
Step 9:
Press the
Play/Pause Button
to play or pause the loaded CD+G.
Step 1:
Press the
Power Button
to turn the unit on.
Step 2:
load the CD or CD+G into the unit’s CD drive.
Step 3:
adjust the
Source Dial
to
CDG.
Step 4:
Press the
Program Button
to begin programming the disc.
• The Program Indicator Light will illuminate red.
Step 5:
Select a CD or CD+G track using the
Skip/Search Buttons.
Step 6:
once the desired track is selected, press the
Program Button
.
Step 7:
Repeat
Step 5-6
until all of the desired tracks are programmed. (19 max)
Step 8:
Press the
Play/Pause Button
to beging playing the programmed tracks.
IJ328-IB.indd 9
7/10/2008 2:21:42 PM