Pairing Bluetooth & Playing Audio
After initial pairing to a Bluetooth device, the headphones will
stay paired unless unpaired manually by the user, or erased due
to a reset of the device. If your device should become unpaired
or you find it is unable to connect, repeat these steps.
1. Power ON the headphones.. The headphones defaults to
Bluetooth Mode and is ready to pair automatically. When
pairing, remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select
IAHN40
in the Bluetooth Settings to pair. If need be, refer
to the user’s manual for your specific device for more
information.
3. When successfully paired, a voice will announce,
“Bluetooth is connected.” Your Bluetooth device will now
be heard through the headphones.
4. Use the controls on the connected Bluetooth device
to select and play audio. Use the headphone controls
or the connected Bluetooth device to play, pause, skip
and adjust the volume level.
Note:
To pair to a different
Bluetooth device, turn off Bluetooth on the currently
connected device first.
Customer Support
Customer Service:
1-888-999-4215
| Email Support:
prodinfo@
dpiinc.com
| Email Parts:
For Warranty Information and the most up-to-date version of
this User’s Guide, go to
www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2020 Digital Products International (DPI, Inc.).
All other trademarks appearing herein are the property of their
respective owners.
Specifications are subject to change without notice.
FCC Warnings
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
•
WARNING: To prevent fire or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
•
Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
•
To avoid hearing damage,
make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
Aux In
Aux In mode will function even if the headphones are not
powered on. To conserve battery power, keep them powered
off when using Aux In.
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the
Aux In
on the
headphones and the
audio output
on an audio device.
2. Use the controls on the connected device to select and
play audio.
Active Noise Canceling
The Active Noise Canceling feature will electronically mute
background noise. It can be used with the Bluetooth or Aux
In modes to enhance the quality of any music or audio that is
playing through the headphones.
Active Noise Canceling mode will function even if the
headphones are not powered ON.
1. To activate noise cancelling, press and hold the
M
button. The Indicator LED will turn green.
2. To deactivate noise cancelling, press and hold the
M
button again. The green LED will turn off.
DC
IN
DC
IN
AUX IN
AUX
IN
LED LE
D
MI
C
MI
C
ANC ON
/ OF
F
ANC ON
/ OF
F
WARNING :
This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.
Previously Connected Devices
• The headphones can remember multiple Bluetooth
devices and will always try to re-connect to the last
device used.
• To re-connect to a different device, turn off Bluetooth on
unwanted devices, then access the Bluetooth settings
menu on the device you wish to use and select
IAHN40.