DC Power Input
Volume
Power / Pair / Play / Pause /Speakerphone
Press and hold for 8-9 sec. to power ON and begin pairing.
Press and hold for 5-6 sec. to power ON/OFF.
Press to play/pause audio or answer/end a phone call.
Overview & Controls
Power Status
Indicator Light
Power ON
Flashing blue light
Low Battery
Flashing red light
Charging
Solid Red light
Finished Charging
Solid Blue light
Bluetooth Status
Indicator Light
Pairing Bluetooth
Flashing red and blue lights
Successfully Paired
Slowly flashing blue light
Features
• Bluetooth wireless
• Sweatproof
• Wireless range: 33 feet
• Voice prompts announce earbud operations
• Built-in microphone
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable battery
• Battery life: approx. 4 hrs
Includes
• 3 sets of eartips
• Micro-USB to USB charging cable
• User’s guide
Charging the Battery
Initial charge time is approximately 2 hours. Charge
fully before use. The low battery indicator will flash for
1 minute, then the unit will automatically power OFF.
1. Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor to charge.
Pairing a Bluetooth Device
1. While the unit is OFF, press and hold the
Play/Pause/Speakerphone/Pair button for
approximately 8-9 seconds until the indicator
light flashes red and blue.
When pairing, remain
within 3 feet of the unit.
2. Using the controls on your Bluetooth device,
select IAEB37 in your Bluetooth settings to pair.
If your device requests a password, enter the default
password
0 0 0 0
. Refer to the user’s manual for
your specific device for specific instructions on
pairing to Bluetooth devices.
3. When successfully paired, an audible chime will
sound and the LED indicator will slowly flash
blue. Audio from the connected Bluetooth device
should now be heard through the earbuds, use
the controls on the connected Bluetooth device
to select and play audio.
After initial pairing, the unit will stay paired unless
unpaired manually by the user or erased due to a reset
of the device. Repeat these steps if your device should
become unpaired or will not connect normally.
Playing Audio Wirelessly
1. If the unit is OFF and has already been paired to a
Bluetooth device, press and hold the Play/Pause/
Speakerphone/Pair button for approximately
5-6 seconds until it automatically connects to
your device. An audible chime will sound and the
LED indicator will turn solid blue.
2. Use the controls on the connected Bluetooth
device to select and play audio.
3. To play or pause audio, press the Play/Pause
button or use the controls on the connected
Bluetooth device.
Using the Speakerphone
1. To accept a call, press the Speakerphone button
or use the controls on the connected phone.
2. To end a call, press the Speakerphone button or
use the controls on the connected phone.
3. To re-dial the last dialed number, press the
Speakerphone button twice.