Overview & Controls
LED Indicators
Status
Indicators
Power On
Flashing blue light
Low Battery
Flashing red light
Charging
Red light
Fully charged
Off
Pairing Wireless
Flashing red and blue lights
Microphone/Indicator
Light
Volume Up
Power / Pair / Play /
Pause /Speakerphone
Press and hold for aprrox. 7
seconds to turn the unit on
and began pairing.
Press and hold to power
ON or OFF.
Press to play or pause audio.
Press to answer incoming
phone call.
Volume Down
DC Power Input
Use with USB charging
cable (included).
Features
• Supports Bluetooth
• Wireless range: 33 feet
• Supports profile A2DP (Advanced Audio
Distribution Profile)
• Voice prompts announce earbud operations
• Built-in microphone
• Digital volume control
• Micro-USB port for battery recharge
• DC battery power: built-in rechargeable lithium
ion battery
• Battery life: approx. 4 hrs at 100% volume
6 hrs at 50%
Includes
• 3 pairs of eartips: 1 small, 1 medium, 1 large
• Micro-USB to USB charging cable
• User’s guide
Features
Initial charge time is approximately 2 hours. Charge
fully before use.
1. Using a Micro-USB to USB cable (included),
connect to the USB port of a powered on
computer or USB power adaptor (not included)
to charge the unit.
Pairing a Bluetooth Device
If your device should become unpaired, or you find it
is unable to connect normally, repeat the steps below.
1. Power on the unit by pressing and holding the
Play/Pause/Speakerphone/Pair button for
approximately 7 seconds.
When pairing, remain
within 3 feet of the unit.
2. Using the controls on your Bluetooth device,
select IAEB06 in your Bluetooth settings to pair.
If your device requests a password, enter the default
password
0 0 0 0
.
3. Refer to the user’s manual for your specific device
for instructions on pairing and connecting
Bluetooth devices. After initial pairing, the unit
will stay paired unless unpaired manually by the
user or erased due to a reset of the device.
Playing Audio Wirelessly
1. Use the controls on the connected Bluetooth
device to select and begin playing an audio
track.
Audio from the connected Bluetooth device
should now be heard through the earbuds.
2. To play or pause audio, press the Play/Pause
button or use the controls on the connected
Bluetooth device.
Using the Speakerphone
1. To accept a call, press the Speakerphone button
or use the controls on the connected phone.
2. To end a call, press the Speakerphone button or
use the controls on the connected phone.
